Connect Imbalance/Temperature, Fans, Condensor Sensor, Rotor Speed Sensor
Next connect S800 (Ribbon Cable) from small PCB Communication mounted on the side
Connect compressor and GND
Connect Motor Temp Switch and Motor Sensor
Connect Motor
Connect Solenoid Valve and Brake Resistor
Connect Lid Latch Motor, Lid Switch, Lid Latch Switches and Main Lines
5 Screws to hold the PCB
5 screws to mount the heat sink to the bottom chassis - Note * the nylon screw at the end cannot be replaced with a metallic screw !!!!
Final connection … Display cable connects to the small COMM PCB mounted on the side
Comments